- Irrigation
- Heat pumps
- Lawn sprinkling
- Air conditioning systems
- Water transfer
- Dewatering
Self-Priming Lawn Sprinkler Pump (Cast Iron)
Self-Priming Lawn Sprinkler Pump (Cast Iron)
Flow Ratings : up to 85 GPM at 5 feet suction lift.
Head Ratings : 119 feet
Ratings : 3/4 to 2 HP
Liquid temperature : +32 °F to +140 °F
Max. Amb Temprature : 104°F
► Once primed initially, it will prime again when the water level rises above the end of the suction pipe due to self priming design.
► Back pullout design allows disassembly of pump for service without disturbing piping during servicing.
► Thermoplastic impeller, diffuser and tube fittings are made from abrasion resistant composite material.
Stainless steel wear ring is provided in diffuser for extended performance in abrasive conditions.
► CED Coating of Grey Iron Parts for rust prevention and aesthetics.
► Cast iron casing has tapped openings for vacuum gauge and casing drain.
► Pump is Powered for Continuous Operation Can be operated continuously without damage.
► Mechanical Seal with Carbon/Ceramic faces, BUNA elastomer and 300 series stainless steel metal parts.
Pump end :
► Inlet: 1-1/2″ NPT suction,
► Outlet:1-1/2″ NPT discharge
► Discharge: to 85 GPM at 5 feet suction lift.
► Heads: to 119 feet.
► Reprime capabilities: to 25 feet suction lift.
► Maximum working pressure: 125 PSI.
► Maximum water temperature: 140° F (60°C).
► Clockwise rotation when viewed from motor end.
Motor end :
► NEMA 56J frame open drip proof.
► 60 Hz, 3450 RPM. 1 – Phase.
► Stainless steel shaft.
► Voltage Range 115/230 for 1 – Phase. Built-in overload protector with automatic reset.
► All models in ODP motor.
► TEFC motor models are available as optional.